From the previous article, the arcing current Ia was calculated from the bolted fault current. With […]
Oil-immersed transformer cooling methods are consistent in both the IEC and IEEE. This designation is one […]
Short-circuit calculation is one of the most important work to be undertaken in plant power distribution. […]
A project dealing only with either IEEE/ANSI/UL or IEC standards is not an issue. If there […]
Important Notes: A conductor size expressed in mm² shall be IEC standard and sizes in AWG […]
Is it possible to use International Standards such as IEC 60364 and NFPA 70 for electrical […]