A Filipino Engineer, Registered Professional Engineer of Queensland (RPEQ) - Australia, and Professional Electrical Engineer (PEE - 1st Place April 1991) - Philippines with extensive experience in concept selection, front-end engineering, HV & LV detail design, construction, and commissioning of Hazardous and Non-Hazardous Area electrical installations in water and wastewater pipeline and pumping facilities, offshore platforms, hydrocarbon process plants and pipelines including related facilities. Hazardous area classification and design certification (UEENEEM015B, UEENEEM016B, UEENEEM017B).
Paralleling of generators is the synchronous operation of two or more generator sets connected together on a common bus in order to provide power to a common load. Paralleling equipment …
There are different criteria in the selection of circuit breakers including voltage, frequency, interrupting capacity, continuous current rating, and unusual operating conditions. This article will give a step by step …
Slip is an important characteristic of an induction motor. Without slip, the induction motor will not be able to perform its allocated task. Slip is the difference between an induction …
Potential Hazards Step potential is the voltage difference between the feet of a person near an energized, grounded object. A person on the ground is subjected to the risk of …
This document “A Brief Comparison of NEMA 250—Enclosures for Electrical Equipment (1000 Volts Maximum) and IEC 60529—Degrees of Protection Provided by Enclosures (IP Code) is a NEMA Standards Publication. In …
This paper written by Jawad Faiz, H.Ebrahimpour, P.Pillay, investigates the negative effect of unbalanced voltage upon the losses and efficiency of a three phase squirrel cage induction motor. The financial …