New pages
From Filipino Engineer Wiki
- 14:52, 10 April 2024 Grounding System (hist | edit) [6,744 bytes] Admin (talk | contribs) (Created page with "={{SUBPAGENAME}}=")
- 05:06, 10 April 2024 Industrial Plant Design/System Planning/Determination of Loads (hist | edit) [32,240 bytes] Admin (talk | contribs) (Created page with "={{SUBPAGENAME}}= {{Disclaimer - Industrial Plant Design}} __TOC__ === General === Determination of the load is the [https://filipinoengineer.com Electrical Engineer's] first problem and may be difficult to solve. The size and number of primary and secondary substations, the size, number, and arrangement of primary feeders, and the type of secondary distribution are largely dependent on the amount and nature of the load and its distribution. The plant distribution s...")
- 14:27, 5 April 2024 Industrial Plant Design/System Planning/Basic Design Consideration (hist | edit) [13,835 bytes] Admin (talk | contribs) (Created page with "={{SUBPAGENAME}}= {{Disclaimer - Industrial Plant Design}} __TOC__ An industrial plant is only as good as its electric distribution system. For this reason, careful system planning for an industrial power system is very important. This wiki outlines the procedures of system planning and presents a guide which will make the details of Electric Power Distribution Design for Industrial Plant more understandable. A standard electric distribution system is not adaptable to...")
- 03:06, 22 March 2024 Industrial Plant Design/System Planning (hist | edit) [1,038 bytes] Admin (talk | contribs) (Created page with "'''Under Construction'''")
- 03:04, 22 March 2024 Industrial Plant Design (hist | edit) [184 bytes] Admin (talk | contribs) (Created page with "'''Under Construction'''")
- 12:29, 29 January 2024 Philippine Electrical Code 2017 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.0 - Wiring Methods/3.0.2 Requirements for Over 600 Volts, Nominal (hist | edit) [8,807 bytes] Admin (talk | contribs) (Created page with "=={{SUBPAGENAME}}== {{Disclaimer PEC}} __TOC__")
- 12:24, 29 January 2024 Philippine Electrical Code 2017 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.0 - Wiring Methods/3.0.1 General Requirements (hist | edit) [49,468 bytes] Admin (talk | contribs) (Created page with "=={{SUBPAGENAME}}== {{Disclaimer PEC}} __TOC__ ==== 3.0.1.1 Scope. ==== =====(a) All Wiring Installations. ===== This article covers wiring methods for all wiring installations unless modified by other articles. =====(b) Integral Parts of Equipment. ===== The provisions of this article are not intended to apply to the conductors that form an integral part of equipment, such as motors, controllers, motor control centers, or factory assembled control equipment or list...")
