Power:Transformer Inrush Current

Transformer Inrush Current

When a transformer works normally, the flux produced in the core is orthogonal to the applied voltage. When the voltage is zero, the flux waveform is at its negative peak. When a transformer is switched on from the primary by keeping the secondary open circulated, it acts as a simple induc- tance and the flux will start from zero as shown in Figure 1.

Figure 1 Transformer Voltage and Flux

If the switching on is at the instant of voltage zero, the flux is initiated from the same origin of the voltage. The flux is the integral of the voltage, and the value of flux at time π can be written as

${\phi }={\phi }_{m}\int _{0}^{\pi }\sin wtdwt\,$