Industrial Plant Design/System Planning

System Planning

DISCLAIMER

This is a Design Guide is based on IEEE standards.

While the authors have used good faith and efforts to ensure that the information and instructions contained in this work are accurate, the authors disclaim all responsibility for errors or omissions, including without limitation responsibility for damages resulting from the use of or reliance on this work. Use of the information and instructions contained in this work is at your own risk. If any contents or other technology this work contains or describes is subject to open source licenses or the intellectual property rights of others, it is your responsibility to ensure that your use thereof complies with such licenses and/or rights.

Note: This is a work in progress...

An industrial plant is only as good as its electric distribution system. For this reason, careful system planning for an industrial power system is very important. This wiki outlines the procedures of system planning and presents a guide that will make the details of Electric Power Distribution Design for Industrial Plant more understandable.

A standard electric distribution system is not adaptable to all industrial plants because no two plants have identical requirements. Methods must be used to analyze the specific requirements of the industrial plant qualitatively, and quantitatively, and design the system which will most adequately meet the electrical requirements of the particular plant, with consideration given to both present and future operating conditions.

1. Basic Design Consideration
2. Determination of Loads