PEC:Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials

From Filipino Engineer Wiki
Jump to navigation Jump to search

Chapter 3. Wiring Methods and Materials

This is not an official copy of the Philippine Electrical Code. This is a Design Guide according to the provisions of the Philippine Electrical Code. It also provides interpretation and annotations of the clauses of the Philippine Electrical Code. Any information, interpretation and/or annotation presented herein are based on personal opinion of the authors and does not represent the official interpretation of the Philippine Electrical Code.

While the authors have used good faith and efforts to ensure that the information and instructions contained in this work are accurate, the authors disclaim all responsibility for errors or omissions, including without limitation responsibility for damages resulting from the use of or reliance on this work. Use of the information and instructions contained in this work is at your own risk. If any contents or other technology this work contains or describes is subject to open source licenses or the intellectual property rights of others, it is your responsibility to ensure that your use thereof complies with such licenses and/or rights

Note: This is a work in progress...

Article 3.0 - Wiring Methods

Article 3.10 - Conductors For General Wiring

Article 3.12 - Cabinets, Cutout Boxes, And Meter Socket Enclosures

Article 3.14 - Outlet, Device, Pull, And Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures

Article 3.20 - Armored Cable: Type AC

Article 3.22 - Flat Cable Assemblies: Type FC

Article 3.24 - Flat Conductor Cable: Type FCC

Article 3.26 - Integrated Gas Spacer Cable: Type IGS

Article 3.28 - Medium Voltage Cable: Type MV

Article 3.30 - Metal-Clad Cable: Type MC

Article 3.32 - Mineral-Insulated, Metalsheathed Cable: Type MI

Article 3.34 - Nonmetallic-Sheathed Cable: Types NM, NMC, And NMS

Article 3.36 - Power And Control Tray Cable: Type TC

Article 3.38 - Service-Entrance Cable: Types SE And USE

Article 3.40 - Underground Feeder And Branch-Circuit Cable: Type UF

Article 3.42 - Intermediate Metal Conduit: Type IMC

Article 3.44 - Rigid Metal Conduit: Type RMC

Article 3.48 - Flexible Metal Conduit: Type FMC

Article 3.50 - Liquidtight Flexible Metal Conduit: Type LFMC

Article 3.52 - Rigid Nonmetallic Conduit: Type RNC

Article 3.53 - High Density Polyethylene Conduit: Type HDPE Conduit

Article 3.54 - Nonmetallic Underground Conduit With Conductors: Type NUCC

Article 3.56 - Liquidtight Flexible Nonmetallic Conduit: Type LFNC

Article 3.58 - Electrical Metallic Tubing: Type EMT

Article 3.62 - Electrical Nonmetallic Tubing: Type ENT

Article 3.66 - Auxiliary Gutters

Article 3.68 - Busways

Article 3.70 - Cablebus

Article 3.72 - Cellular Concrete Floor Raceways

Article 3.74 - Cellular Metal Floor Raceways

Article 3.76 - Metal Wireways

Article 3.78 - Nonmetallic Wireways

Article 3.80 - Multioutlet Assembly

Article 3.82 - Nonmetallic Extensions

Article 3.84 - Strut-Type Channel Raceway

Article 3.86 - Surface Metal Raceways

Article 3.88 - Surface Nonmetallic Raceways

Article 3.90 - Underfloor Raceways

Article 3.92 - Cable Trays

Article 3.94 - Concealed Knob-And-Tube Wiring

Article 3.96 - Messenger Supported Wiring

Article 3.98 - Open Wiring On Insulators