Philippine Electrical Code 2017 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.0 - Wiring Methods/3.0.1 General Requirements: Revision history

From Filipino Engineer Wiki

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

29 January 2024

  • curprev 12:2412:24, 29 January 2024‎ Admin talk contribs‎ 49,468 bytes +49,468‎ Created page with "=={{SUBPAGENAME}}== {{Disclaimer PEC}} __TOC__ ==== 3.0.1.1 Scope. ==== =====(a) All Wiring Installations. ===== This article covers wiring methods for all wiring installations unless modified by other articles. =====(b) Integral Parts of Equipment. ===== The provisions of this article are not intended to apply to the conductors that form an integral part of equipment, such as motors, controllers, motor control centers, or factory assembled control equipment or list..."
Retrieved from "https://filipinoengineer.com/wiki/Philippine_Electrical_Code_2017_Part_1/Chapter_3._Wiring_Methods_and_Materials/Article_3.0_-_Wiring_Methods/3.0.1_General_Requirements"
Powered by MediaWiki