Philippine Electrical Code 2017 Part 1/Chapter 6. Special Equipment/Article 6.90 Solar Photovoltaic PV) Systems

Article 6.90 Solar Photovoltaic PV) Systems

DISCLAIMER

This is not an official copy of the Philippine Electrical Code. This is a Design Guide according to the provisions of the Philippine Electrical Code. It also provides interpretation and annotations of the clauses of the Philippine Electrical Code. Any information, interpretation and/or annotation presented herein are based on personal opinion of the authors and does not represent the official interpretation of the Philippine Electrical Code.

While the authors have used good faith and efforts to ensure that the information and instructions contained in this work are accurate, the authors disclaim all responsibility for errors or omissions, including without limitation responsibility for damages resulting from the use of or reliance on this work. Use of the information and instructions contained in this work is at your own risk. If any contents or other technology this work contains or describes is subject to open source licenses or the intellectual property rights of others, it is your responsibility to ensure that your use thereof complies with such licenses and/or rights.

Note: This is a work in progress...

6.90.1 General

6.90.1.1 Scope.

This article applies to solar PV systems, other than those covered by Article 6.91, including the array circuit(s), inverter(s), and controller(s) for such systems. [See Figure 6.90.1.l(A) and Figure 6.90.1.l(B).] The systems covered by this article may be interactive with other electrical power production sources or stand-alone or both, and may or may not be connected to energy storage systems such as batteries. These PV systems may have ac or de output for utilization.