Philippine Electrical Code 2009 Part 1
From Filipino Engineer Wiki
Philippine Electrical Code 2009 Part 1
DISCLAIMER
This is not an official copy of the Philippine Electrical Code. This is a Design Guide according to the provisions of the Philippine Electrical Code. It also provides interpretation and annotations of the clauses of the Philippine Electrical Code. Any information, interpretation and/or annotation presented herein are based on personal opinion of the authors and does not represent the official interpretation of the Philippine Electrical Code.
While the authors have used good faith and efforts to ensure that the information and instructions contained in this work are accurate, the authors disclaim all responsibility for errors or omissions, including without limitation responsibility for damages resulting from the use of or reliance on this work. Use of the information and instructions contained in this work is at your own risk. If any contents or other technology this work contains or describes is subject to open source licenses or the intellectual property rights of others, it is your responsibility to ensure that your use thereof complies with such licenses and/or rights.
Note: This is a work in progress...
Table of Contents
{{#subpages:Philippine Electrical Code 2009 Part 1}}
- Philippine Electrical Code 2009 Part 1
- Philippine Electrical Code 2009 Part 1/Chapter 1. General
- Philippine Electrical Code 2009 Part 1/Chapter 1. General/Article 1.0 - Introduction
- Philippine Electrical Code 2009 Part 1/Chapter 1. General/Article 1.10 - Requirements For Electrical Installations
- Philippine Electrical Code 2009 Part 1/Chapter 1. General/Article 1.1 - Definitions
- Philippine Electrical Code 2009 Part 1/Chapter 1. General/Article 1.2 - Permits And Inspection Certificates
- Philippine Electrical Code 2009 Part 1/Chapter 2. Wiring and Protection
- Philippine Electrical Code 2009 Part 1/Chapter 2. Wiring and Protection/Article 2.0 - Use And Identification Of Grounded Conductors
- Philippine Electrical Code 2009 Part 1/Chapter 2. Wiring and Protection/Article 2.10 - Branch Circuits
- Philippine Electrical Code 2009 Part 1/Chapter 2. Wiring and Protection/Article 2.15 - Feeders
- Philippine Electrical Code 2009 Part 1/Chapter 2. Wiring and Protection/Article 2.20 - Branch-Circuit, Feeder, And Service Calculations
- Philippine Electrical Code 2009 Part 1/Chapter 2. Wiring and Protection/Article 2.25 - Outside Branch Circuits And Feeders
- Philippine Electrical Code 2009 Part 1/Chapter 2. Wiring and Protection/Article 2.30 - Services
- Philippine Electrical Code 2009 Part 1/Chapter 2. Wiring and Protection/Article 2.40 - Overcurrent Protection
- Philippine Electrical Code 2009 Part 1/Chapter 2. Wiring and Protection/Article 2.50 - Grounding And Bonding
- Philippine Electrical Code 2009 Part 1/Chapter 2. Wiring and Protection/Article 2.80 - Surge Arresters
- Philippine Electrical Code 2009 Part 1/Chapter 2. Wiring and Protection/Article 2.85 - Transient Voltage Surge Suppressors: TVSS
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.0 - Wiring Methods
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.10 - Conductors For General Wiring
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.12 - Cabinets, Cutout Boxes, And Meter Socket Enclosures
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.14 - Outlet, Device, Pull, And Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.20 - Armored Cable: Type AC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.22 - Flat Cable Assemblies: Type FC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.24 - Flat Conductor Cable: Type FCC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.26 - Integrated Gas Spacer Cable: Type IGS
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.28 - Medium Voltage Cable: Type MV
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.30 - Metal-Clad Cable: Type MC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.32 - Mineral-Insulated, Metalsheathed Cable: Type MI
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.34 - Nonmetallic-Sheathed Cable: Types NM, NMC, And NMS
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.36 - Power And Control Tray Cable: Type TC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.38 - Service-Entrance Cable: Types SE And USE
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.40 - Underground Feeder And Branch-Circuit Cable: Type UF
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.42 - Intermediate Metal Conduit: Type IMC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.44 - Rigid Metal Conduit: Type RMC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.48 - Flexible Metal Conduit: Type FMC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.50 - Liquidtight Flexible Metal Conduit: Type LFMC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.52 - Rigid Nonmetallic Conduit: Type RNC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.53 - High Density Polyethylene Conduit: Type HDPE Conduit
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.54 - Nonmetallic Underground Conduit With Conductors: Type NUCC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.56 - Liquidtight Flexible Nonmetallic Conduit: Type LFNC
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.58 - Electrical Metallic Tubing: Type EMT
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.62 - Electrical Nonmetallic Tubing: Type ENT
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.66 - Auxiliary Gutters
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.68 - Busways
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.70 - Cablebus
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.72 - Cellular Concrete Floor Raceways
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.74 - Cellular Metal Floor Raceways
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.76 - Metal Wireways
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.78 - Nonmetallic Wireways
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.80 - Multioutlet Assembly
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.82 - Nonmetallic Extensions
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.84 - Strut-Type Channel Raceway
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.86 - Surface Metal Raceways
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.88 - Surface Nonmetallic Raceways
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.90 - Underfloor Raceways
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.92 - Cable Trays
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.94 - Concealed Knob-And-Tube Wiring
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.96 - Messenger Supported Wiring
- Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.98 - Open Wiring On Insulators
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.10 - Luminaires (Lighting Fixtures), Lampholders, And Lamps
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.11 - Lighting Systems Operating At 30 Volts Or Less
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.22 - Appliances
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.24 - Fixed Electric Space-Heating Equipment
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.27 - Fixed Electric Heating Equipment For Pipelines And Vessels
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.2 - Fixture (Luminaires) Wires
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.30 - Motors, Motor Circuits, And Controllers
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.40 - Air-Conditioning And Refrigerating Equipment
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.45 - Generators
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.4 - Switches
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.50 - Transformers And Transformer Vaults (Including Secondary Ties)
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.55 - Phase Converters
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.60 - Capacitors
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.6 - Receptacles, Cord Connectors, And Attachment Plugs (Caps)
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.70 - Resistors And Reactors
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.80 - Storage Batteries
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.8 - Switchboards And Panelboards
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.90 - Equipment, Over 600 Volts, Nominal
- Philippine Electrical Code 2009 Part 1/Chapter 4. Equipment for General Use/Article 4.9 - Industrial Control Panels
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.0 - Hazardous (Classified) Locations, Classes I, II, And III, Divisions 1 And 2
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.10 - Hazardous (Classified) Locations - Specific
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.11 - Commercial Garages, Repair And Storage
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.13 - Aircraft Hangars
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.14 - Motor Fuel Dispensing Facilities
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.15 - Bulk Storage Plants
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.16 - Spray Application, Dipping, And Coating Processes
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.17 - Health Care Facilities
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.18 - Assembly Occupancies
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.1 - Class I Locations
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.20 - Theaters, Audience Areas Of Motion Picture And Television Studios, Performance Areas, And Similar Locations
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.25 - Carnivals, Circuses, Fairs, And Similar Events
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.2 - Class II Locations
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.30 - Motion Picture And Television Studios And Similar Locations
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.3 - Class III Locations
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.40 - Motion Picture Projection Rooms
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.45 - Manufactured Buildings
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.47 - Agricultural Buildings
- Philippine Electrical Code 2009 Part 1/Chapter 5. Special Occupancies/Article 5.4 - Intrinsically Safe Systems
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.0 - Electric Signs And Outline Lighting
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.10 - Cranes And Hoists
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.20 - Elevators, Dumbwaiters, Escalators, Moving Walks, Wheelchair Lifts, And Stairway Chair Lifts
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.25 - Electric Vehicle Charging System
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.30 - Electric Welders
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.40 - Audio Signal Processing, Amplification, And Reproduction Equipment
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.45 - Information Technology Equipment
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.47 – Sensitive Electronic Equipment
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.4 - Manufactured Wiring Systems
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.50 - Pipe Organs
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.5 - Office Furnishings (Consisting Of Lighting Accessories And Wired Partitions)
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.60 - X-Ray Equipment
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.65 - Induction And Dielectric Heating
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.68 - Electrolytic Cells
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.69 - Electroplating
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.70 - Industrial Machinery
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.75 - Electrically Driven Or Controlled Irrigation Machines
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.80 - Swimming Pools, Fountains, And Similar Installations
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.82 - Natural And Artificially Made Bodies Of Water
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.85 - Integrated Electrical Systems
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.90 - Solar Photovoltaic Systems
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.92 - Fuel Cell Systems
- Philippine Electrical Code 2009 Part 1/Chapter 6. Special Equipment/Article 6.95 - Fire Pumps
- Philippine Electrical Code 2009 Part 1/Chapter 7. Special Conditions
- Philippine Electrical Code 2009 Part 1/Chapter 7. Special Conditions/Article 7.0 — Emergency Systems
- Philippine Electrical Code 2009 Part 1/Chapter 7. Special Conditions/Article 7.1 — Legally Required Standby Systems
- Philippine Electrical Code 2009 Part 1/Chapter 7. Special Conditions/Article 7.20 — Circuits And Equipment Operating At Less Than 50 Volts
- Philippine Electrical Code 2009 Part 1/Chapter 7. Special Conditions/Article 7.25 — Class 1, Class 2, And Class 3 Remote-Control, Signaling, And Power-Limited Circuits
- Philippine Electrical Code 2009 Part 1/Chapter 7. Special Conditions/Article 7.27 — Instrumentation Tray Cable: Type ITC
- Philippine Electrical Code 2009 Part 1/Chapter 7. Special Conditions/Article 7.2 — Optional Standby Systems
- Philippine Electrical Code 2009 Part 1/Chapter 7. Special Conditions/Article 7.5 — Interconnected Electric Power Production Sources
- Philippine Electrical Code 2009 Part 1/Chapter 7. Special Conditions/Article 7.60 — Fire Alarm Systems
- Philippine Electrical Code 2009 Part 1/Chapter 7. Special Conditions/Article 7.70 — Optical Fiber Cables And Raceways
- Philippine Electrical Code 2009 Part 1/Chapter 7. Special Conditions/Article 7.80 — Closed-Loop And Programmed Power Distribution
- Philippine Electrical Code 2009 Part 1/Chapter 8. Communications Systems
- Philippine Electrical Code 2009 Part 1/Chapter 8. Communications Systems/Article 8.0 — Communications Circuits
- Philippine Electrical Code 2009 Part 1/Chapter 8. Communications Systems/Article 8.10 — Radio And Television Equipment
- Philippine Electrical Code 2009 Part 1/Chapter 8. Communications Systems/Article 8.20 — Community Antenna Television And Radio Distribution Systems
- Philippine Electrical Code 2009 Part 1/Chapter 8. Communications Systems/Article 8.30 — Network-Powered Broadband Communications Systems