User contributions for Admin

14:3414:34, 5 April 2024 diff hist −811‎ Industrial Plant Design/System Planning/Basic Design Consideration ‎No edit summary current
14:3114:31, 5 April 2024 diff hist −13,702‎ Industrial Plant Design/System Planning ‎ Replaced content with "={{SUBPAGENAME}}= {{Disclaimer - Industrial Plant Design}} __TOC__ An industrial plant is only as good as its electric distribution system. For this reason, careful system planning for an industrial power system is very important. This wiki outlines the procedures of system planning and presents a guide which will make the details of Electric Power Distribution Design for Industrial Plant more understandable. A standard electric distribution system is not adaptabl..." Tag: Replaced
14:2714:27, 5 April 2024 diff hist +14,646‎ N Industrial Plant Design/System Planning/Basic Design Consideration ‎ Created page with "={{SUBPAGENAME}}= {{Disclaimer - Industrial Plant Design}} __TOC__ An industrial plant is only as good as its electric distribution system. For this reason, careful system planning for an industrial power system is very important. This wiki outlines the procedures of system planning and presents a guide which will make the details of Electric Power Distribution Design for Industrial Plant more understandable. A standard electric distribution system is not adaptable to..."

03:5103:51, 4 April 2024 diff hist +41‎ Industrial Plant Design/System Planning ‎No edit summary
03:5003:50, 4 April 2024 diff hist +169‎ Template:Disclaimer - Industrial Plant Design ‎No edit summary current
03:4803:48, 4 April 2024 diff hist +695‎ N Template:Disclaimer - Industrial Plant Design ‎ Created page with "This is a Design Guide is based on IEEE standards. While the authors have used good faith and efforts to ensure that the information and instructions contained in this work are accurate, the authors disclaim all responsibility for errors or omissions, including without limitation responsibility for damages resulting from the use of or reliance on this work. Use of the information and instructions contained in this work is at your own risk. If any contents or other techn..."
03:4603:46, 4 April 2024 diff hist +42‎ Industrial Plant Design ‎ →‎{{SUBPAGENAME}} current
03:4103:41, 4 April 2024 diff hist −1‎ Industrial Plant Design/System Planning ‎ →‎Utility Service =
03:4103:41, 4 April 2024 diff hist +1,460‎ Industrial Plant Design/System Planning ‎ →‎Operation and Maintenance

23:5123:51, 4 December 2023 diff hist +337‎ Power:Transformer Load Tap Changers ‎No edit summary
23:5023:50, 4 December 2023 diff hist 0‎ N File:Load Tap Changer.webp ‎No edit summary current
23:3723:37, 4 December 2023 diff hist +1,199‎ N Power:Transformer Load Tap Changers ‎ Created page with "== I. Introduction == The flicker of the house lights in the evening when most people are at home and started using electricity for household chores is a sign of a load tap changer (LTC) tap change. The increase in electrical load on the distribution network causes the voltage to sag below its nominal value. This voltage sage triggers a signal to the LTC to change taps to adjust the voltage back to its nominal value with some tolerance. There are many applications of tr..."

16:1116:11, 10 November 2023 diff hist +2‎ Calculations:Electrical Design Guideline ‎ →‎Basic Requirements for Electrical Calculations current
16:1116:11, 10 November 2023 diff hist +61‎ Calculations:Electrical Design Guideline ‎ →‎Basic Requirements for Electrical Calculations
16:1016:10, 10 November 2023 diff hist −4,579‎ Calculations:Electrical Design Guideline ‎No edit summary
16:0916:09, 10 November 2023 diff hist +4,522‎ N Calculations:Electrical Design Guideline/Basic Electrical Engineering Formulas ‎ Created page with "=== Basic Electrical Engineering Formulas === ==== List of Symbols ==== ''V'' - Voltage (volts) ''I'' - Current (amps) ''R'' - Resistance (ohms) ''X'' - Reactance (ohms) ''Z'' - Impedance (ohms) ''W'' Real Power (watts) ''θ'' - Phase angle whose cosine is the power factor ''eff'' - Efficiency ==== Direct Current (DC) Formulas ==== '''Basic Formulas''' ===== Resistance ===== : <math>R={V \over I}</math> : <math>R={V^2 \over P}</math> : <math>R={P \o..." current
15:5515:55, 10 November 2023 diff hist +12‎ Philippine Electrical Code 2017 Part 1 ‎No edit summary current Tag: Manual revert
15:4015:40, 10 November 2023 diff hist +165‎ N Category:Philippine Electrical Code 2017 Part 1 ‎ Created page with "__NOTOC__ =={{FULLPAGENAME}}== {{Disclaimer PEC}} center|Philippine Electrical Code 2017 Part 1 Category:Philippine Electrical Code" current
15:3815:38, 10 November 2023 diff hist −12‎ Philippine Electrical Code 2017 Part 1 ‎ →‎{{FULLPAGENAME}} Tag: Reverted
15:3715:37, 10 November 2023 diff hist −92‎ Category:Philippine Electrical Code ‎ Blanked the page current Tag: Blanking

03:2203:22, 7 November 2023 diff hist +45‎ Basics:Difference Between A Soft Starter and A Variable Speed Drive ‎No edit summary current
03:2103:21, 7 November 2023 diff hist 0‎ N File:VSD.jpg ‎No edit summary current
03:1603:16, 7 November 2023 diff hist +156‎ Template:Tutorials ‎ →‎Electrical Engineering
03:1303:13, 7 November 2023 diff hist −14‎ Basics:Difference Between A Soft Starter and A Variable Speed Drive ‎No edit summary
03:1103:11, 7 November 2023 diff hist +40‎ Basics:Difference Between A Soft Starter and A Variable Speed Drive ‎No edit summary
03:0303:03, 7 November 2023 diff hist −70‎ Basics:Difference Between A Soft Starter and A Variable Speed Drive ‎No edit summary
03:0203:02, 7 November 2023 diff hist +1‎ Basics:Difference Between A Soft Starter and A Variable Speed Drive ‎ →‎Source
03:0003:00, 7 November 2023 diff hist +4,228‎ N Basics:Difference Between A Soft Starter and A Variable Speed Drive ‎ Created page with "== The Difference Between a Soft Starter and A Variable Speed Drive == Soft starts and variable speed drives can both be used to reduce inrush current and limit torque thereby reducing large electrical and mechanical stresses on the motor windings, cables and components and can extend the life of a motor by reducing the amount of heat caused by frequent start and stops. == What’s a soft starter? == Solid state soft starters use semiconductor devices to temporarily r..."

04:5404:54, 6 November 2023 diff hist +101‎ Template:Tutorials ‎ →‎Power Engineering
04:4504:45, 6 November 2023 diff hist 0‎ Power:Introduction to Electrical Relays ‎ →‎Functional Categories current
04:2404:24, 6 November 2023 diff hist +52‎ Power:Introduction to Electrical Relays ‎ →‎Functional Categories
04:2104:21, 6 November 2023 diff hist +38‎ Power:Introduction to Electrical Relays ‎No edit summary
04:1704:17, 6 November 2023 diff hist 0‎ N File:Protection Relays.jpg ‎No edit summary current
04:1504:15, 6 November 2023 diff hist +2,472‎ N Power:Introduction to Electrical Relays ‎ Created page with "== Electrical Relays == Electrical relays are compact analog networks that are connected throughout the power system to detect intolerable or unwanted conditions within an assigned area. They are, in effect, a form of active insurance designed to maintain a high degree of service continuity, and limit equipment damage. They are "Silent Sentinels". While protective relays are more populat, other types of relays are applied on a more limited basis or used as part of a tota..."

User contributions for Admin

17 April 2024

15 April 2024

12 April 2024

11 April 2024

10 April 2024

5 April 2024

4 April 2024

2 April 2024

29 March 2024

28 March 2024

27 March 2024

22 March 2024

29 January 2024

26 January 2024

20 January 2024

5 December 2023

4 December 2023

1 December 2023

30 November 2023

10 November 2023

9 November 2023

8 November 2023

7 November 2023

6 November 2023

29 October 2023

22 October 2023

21 October 2023