Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials

From Filipino Engineer Wiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


Chapter 3. Wiring Methods and Materials

DISCLAIMER
This is not an official copy of the Philippine Electrical Code. This is a Design Guide according to the provisions of the Philippine Electrical Code. It also provides interpretation and annotations of the clauses of the Philippine Electrical Code. Any information, interpretation and/or annotation presented herein are based on personal opinion of the authors and does not represent the official interpretation of the Philippine Electrical Code.


While the authors have used good faith and efforts to ensure that the information and instructions contained in this work are accurate, the authors disclaim all responsibility for errors or omissions, including without limitation responsibility for damages resulting from the use of or reliance on this work. Use of the information and instructions contained in this work is at your own risk. If any contents or other technology this work contains or describes is subject to open source licenses or the intellectual property rights of others, it is your responsibility to ensure that your use thereof complies with such licenses and/or rights.

Note: This is a work in progress...

Table of Contents

Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.0 - Wiring Methods
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.10 - Conductors For General Wiring
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.12 - Cabinets, Cutout Boxes, And Meter Socket Enclosures
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.14 - Outlet, Device, Pull, And Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.20 - Armored Cable: Type AC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.22 - Flat Cable Assemblies: Type FC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.24 - Flat Conductor Cable: Type FCC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.26 - Integrated Gas Spacer Cable: Type IGS
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.28 - Medium Voltage Cable: Type MV
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.30 - Metal-Clad Cable: Type MC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.32 - Mineral-Insulated, Metalsheathed Cable: Type MI
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.34 - Nonmetallic-Sheathed Cable: Types NM, NMC, And NMS
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.36 - Power And Control Tray Cable: Type TC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.38 - Service-Entrance Cable: Types SE And USE
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.40 - Underground Feeder And Branch-Circuit Cable: Type UF
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.42 - Intermediate Metal Conduit: Type IMC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.44 - Rigid Metal Conduit: Type RMC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.48 - Flexible Metal Conduit: Type FMC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.50 - Liquidtight Flexible Metal Conduit: Type LFMC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.52 - Rigid Nonmetallic Conduit: Type RNC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.53 - High Density Polyethylene Conduit: Type HDPE Conduit
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.54 - Nonmetallic Underground Conduit With Conductors: Type NUCC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.56 - Liquidtight Flexible Nonmetallic Conduit: Type LFNC
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.58 - Electrical Metallic Tubing: Type EMT
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.62 - Electrical Nonmetallic Tubing: Type ENT
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.66 - Auxiliary Gutters
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.68 - Busways
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.70 - Cablebus
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.72 - Cellular Concrete Floor Raceways
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.74 - Cellular Metal Floor Raceways
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.76 - Metal Wireways
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.78 - Nonmetallic Wireways
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.80 - Multioutlet Assembly
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.82 - Nonmetallic Extensions
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.84 - Strut-Type Channel Raceway
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.86 - Surface Metal Raceways
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.88 - Surface Nonmetallic Raceways
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.90 - Underfloor Raceways
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.92 - Cable Trays
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.94 - Concealed Knob-And-Tube Wiring
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.96 - Messenger Supported Wiring
Philippine Electrical Code 2009 Part 1/Chapter 3. Wiring Methods and Materials/Article 3.98 - Open Wiring On Insulators