Category:Philippine Electrical Code

DISCLAIMER
This is not an official copy of the Philippine Electrical Code. This is a Design Guide according to the provisions of the Philippine Electrical Code. It also provides interpretation and annotations of the clauses of the Philippine Electrical Code. Any information, interpretation and/or annotation presented herein are based on personal opinion of the authors and does not represent the official interpretation of the Philippine Electrical Code.

While the authors have used good faith and efforts to ensure that the information and instructions contained in this work are accurate, the authors disclaim all responsibility for errors or omissions, including without limitation responsibility for damages resulting from the use of or reliance on this work. Use of the information and instructions contained in this work is at your own risk. If any contents or other technology this work contains or describes is subject to open source licenses or the intellectual property rights of others, it is your responsibility to ensure that your use thereof complies with such licenses and/or rights

Note: This is a work in progress...


The Philippine Electrical Code sets out the minimum requirements for the design, construction, and testing of electrical installations. The requirements are intended to protect persons and livestock from electric shock, fire and physical injury hazards.

This wiki will provide typical electrical installation scenarios which complies with the minimum requirements of the Philippine Electrical Code.

There are many ways to comply with the Philippine Electrical Code. This wiki is intended to be a design guide for common electrical installations. While the principles apply similarly to larger and more complex installations, it is not the intention of this wiki to attempt to address the detailed design requirements of those installations. This wiki will be reviewed periodically to take account of the changes in the requirements of the Philippine Electrical Codes and other relevant standards.

The Philippine Electrical Code (PEC) is a modified version of the National Electrical Code. The modifications were made to suit the local Philippine environment and conversion into the SI system. There are still lots of work that need to be done with the PEC. One important matter to point out is the use of IEC in the Philippine product standards. The PEC should be able to address these changes accordingly.

Conventions Used In This Design Guide

This indicates that the texts inside the box is an annotation of the preceding PEC section and not a part of the Philippine Electrical Code.
This indicates that the texts inside the box is an extract from another standard or reference and not a part of the Philippine Electrical Code.
This indicates that the texts inside the box is a tip and not a part of the Philippine Electrical Code.
This indicates that the texts inside the box is an important note to consider and not a part of the Philippine Electrical Code.
FPN: This indicates that the texts inside the box is a FPN: This is a fine print note and a part of the Philippine Electrical Code
Exception: This indicates that the texts is an Exception: This is an exception of the preceeding section and a part of the Philippine Electrical Code

Subcategories

This category has only the following subcategory.

Pages in category "Philippine Electrical Code"

This category contains only the following page.